Application of plate heat exchange unit in domestic hot water field

For a long time before, in fact, users were not optimistic about plate heat exchanger units, because people used boiler heating stations or some direct supply station projects before. The common feature of these projects is that they are far less than plate heat exchanger units in terms of floor space and heat exchange efficiency. However, after all, they are new equipment, so users are generally reluctant to try to understand it. As a result, the heat exchange effect in some special communities or even areas is very poor, and many users are not satisfied with the heat exchange effect.

The technology of plate heat exchanger was realized in the north of China. Some users began to discover the plate heat exchanger equipment and apply it to the process. It was found that all other processes could reach the standard, except those who just touched the equipment and were not familiar with the operation, and the residents used it with excellent effect. Only then did the plate heat exchanger gradually spread its reputation in the domestic hot water field of residents.

The realization of this process by plate heat exchanger depends on the following factors:

1. Plate heat exchanger units can not only provide heat source, but also hot water. In the daily life of residents, it must be as simple as heating with heat source, but also adapt to users' hot water supply. If using other equipment will increase the cost, then why don't we use plate heat exchanger units together?

2. The equipment can greatly realize the technological characteristics of energy saving and environmental protection, and can also increase the standard level of modern buildings. In some office buildings, shopping malls, sports venues and other places, the pollution discharge can be greatly reduced.

3. The equipment has a wide application range, and the plate heat exchanger can connect the heat exchangers in series or in parallel, so it is very suitable for large-scale process places. Moreover, the plate heat exchanger units can also be combined by multiple vehicles, so the adaptability is higher.

4. The remote control of data is in line with the public opinion. In the past, some process equipment needed to be inspected on the spot to check its status, whether setting parameters or turning it on or off. Even during the operation, it was a waste of manpower and time. The automatic process of plate heat exchanger also ensured the comfort of users, so that users could operate the equipment at home.

Disclaimer: As the contents of this page are collected from Internet data, all materials are for users' reference only; Our company does not guarantee or represent that the information on this website is comprehensive and accurate, nor does it guarantee or represent that these information are the latest information. If for any reason, the content of this website or users rely on this website to cause any loss or damage, our company will not bear any legal responsibility.